Can I replace my roof myself?


You can watch a few videos, buy shingles at the hardware store, and rent a dumpster. On paper, replacing your own roof looks like a big weekend project that saves a lot of money.
We're roofers, so you might expect us to tell you never to try it. We'd rather give you the honest picture: what the job really involves, what can go wrong, what you'd actually save, and the parts of roof care you can safely handle yourself.
The short answer
In Tennessee, you're generally allowed to work on the house you own and live in without a contractor's license. State law, Tenn. Code § 62-6-103, exempts owners doing their own work, or directly supervising it, on their own property for their own use. Your city or county may still require a permit, and some, like the City of Cleveland, have a homeowner permit affidavit you sign to take on the job yourself.
So yes, it can be legal. Whether it's a good idea is a different question, and for most people the answer is no.
One warning before anything else: the owner exemption covers you. It doesn't cover anyone you hire. If a roofer asks you to pull the permit in your name, that's a red flag. Tennessee building departments warn that unlicensed contractors use that trick to dodge the licensing law and avoid liability for injuries on the job.
What a roof replacement actually involves
Shingles are the part everyone pictures. They're only part of the job. A full replacement looks like this:
Permit and materials.Ā Measure the roof in squares, order shingles, underlayment, starter strips, ridge caps, drip edge, flashing, pipe boots, vents, and nails, and schedule a dumpster.
Tear-off.Ā Strip every shingle and nail down to the wood, often thousands of pounds of material, and get it into the dumpster without wrecking the yard.
Deck repair.Ā Find and replace soft or rotten decking before anything goes on top.
Dry-in.Ā Install drip edge, ice and water barrier in valleys and other leak-prone areas, and underlayment over the whole deck, the same day the roof is opened.
Flashing.Ā Fit new flashing at every wall, chimney, valley, and pipe. This is where a lot of leaks start, and it's the hardest part to get right without experience.
Shingles.Ā Install starter strips, then every course to the manufacturer's nailing pattern, cut around valleys and hips, and finish the ridge.
Ventilation and cleanup.Ā Install vents, then sweep for nails across the whole property.
A trained crew usually does that in a day or two. A homeowner working weekends can take weeks, with the roof partly open the whole time.
The real risks
Falling.Ā This is the big one. Falls are the leading cause of death in construction, according to OSHA, and that's among people trained to work at height with the right gear. A study of federal injury data found an average of about 135,000 people a year were treated in emergency rooms for ladder injuries, and that was before counting falls from the roof itself. Professional crews use harnesses, roof anchors, and roof jacks. Most DIY roofers don't.
Heat.Ā Summer roof surfaces get hot enough to soften shingles and wear you down fast. Soft shingles scuff and tear under your feet, and a tired roofer makes mistakes.
Weather.Ā Once the old roof is off, the house is only as dry as whatever you got down that day. A pop-up storm on day three of a weekend project can mean water in the attic and ceilings.
Mistakes that leak later.Ā The common ones are nails in the wrong spot, flashing tucked the wrong way, missing ice and water barrier in the valleys, and too little ventilation. None of them show up right away. They show up as a stain on the ceiling a year or two later, and by then the fix often means pulling up the new roof.
Permits, warranties, insurance, and selling
Permits.Ā Doing the work yourself doesn't skip the permit. If your city or county requires one for a re-roof, you pull it as the owner and you're responsible for the inspections.
Warranties.Ā Depending on the brand, you may still get the shingle manufacturer's standard warranty, but standard warranties don't cover damage caused by installation that doesn't follow the manufacturer's instructions. The stronger system warranties are only available through the manufacturer's certified contractors. And there's no workmanship warranty, because you're the workman. If it leaks, you fix it.
Insurance.Ā Before you start, call your homeowners insurance agent and ask how a self-installed roof affects your coverage, and whether you're covered if you get hurt or damage the house during the job. Policies differ, so get the answer for yours.
Selling the house.Ā A home inspector will look at the roof, and buyers will ask who installed it and whether there's a warranty. "I did it myself" isn't automatically a problem, but a clean permit record and good workmanship matter more than usual.
The money: what DIY actually saves
Doing it yourself saves the labor, which is a big part of any roofing quote. But some of that savings disappears once you add up what you still pay for:
Materials,Ā usually at retail prices instead of the contractor pricing roofers get from suppliers.
The dumpsterĀ and disposal fees for thousands of pounds of old roofing.
Equipment:Ā a good ladder, a harness and roof anchors, roof jacks, a nail gun and compressor, and tarps.
The permit.
Your time,Ā often several weekends, plus days off if the weather turns.
Then there's the cost nobody budgets for: fixing a mistake. A leak from bad flashing can mean ceiling repairs, new decking, and pulling up part of the roof you just finished. A trip to the emergency room costs more than any roof savings.
For some experienced DIYers with a simple, low-slope roof and a crew of capable friends, it can work out. For most homeowners, the math is closer than it looks, and the risk is all on you.
What you can safely do yourself
You don't have to climb on the roof to take good care of it. These are worth doing, and none of them require walking on shingles:
Look from the ground.Ā After storms and twice a year, scan the roof with binoculars for missing, curled, or cracked shingles and anything sitting on the roof.
Check the attic.Ā On a bright day, look for daylight through the boards, water stains, damp insulation, or mold. Check again after a heavy rain.
Keep gutters clear.Ā Clogged gutters can back water up under the roof edge. If you clean them yourself, use a sturdy ladder on level ground and have someone hold it.
Trim trees.Ā Keep branches off the roof and away from it. Hire a tree service for anything big or near power lines.
Keep records.Ā Know your roof's age and shingle type, and keep your warranty and permit paperwork with your house records.
And when something looks wrong, get it looked at early. A small repair now beats a big one later.
Leave the roof to us
We're Josiah and Sam, two brothers who run Riverbend Roofing out of East Brainerd. Even if you're set on doing it yourself, we're happy to come look first. We'll get up on your roof, send you photos and video of what we find, and tell you what it actually needs. If it's a repair, we'll tell you that. On most jobs, you don't pay us anything until the work is finished and you've looked at it.
Call 423-718-0594 or request a free inspection. We work across Chattanooga, Hixson, Red Bank, Ooltewah, Soddy-Daisy, and Cleveland.
Sources
City of Cleveland, TN, Homeowner-Building Permit Affidavit: homeowner permit for work on a primary residence under Tennessee law.
Tennessee Board for Licensing Contractors homeowner affidavit (Maryville copy): T.C.A. 62-6-103 owner exemption, anyone hired isn't exempt, and the warning about unlicensed contractors asking homeowners to pull permits.
Kingsport homeowner affidavit: an owner who occupies a property may perform all types of work on a single-family residence.
Newswise, nonfatal ladder injuries study: average of 135,000 emergency room ladder injuries a year, 1990 to 2005.
OSHA identifies falls as the leading cause of death in construction (osha.gov fall protection pages).




Comments